Views: 0 Author: Site Editor Publish Time: 2021-11-15 Origin: Site
Aluminum alloy scaffold is used for high altitude work tools, so safety is very important, and the correct installation and erection of scaffold is the first step in the safe use of aluminum alloy scaffold. Do you know what tools are needed to build an aluminum scaffolding, and what are the specifications and requirements? This article will introduce some professional knowledge of the correct installation and erection of aluminum scaffolding.
The article is mainly divided into the following parts：
What are the parts and tools needed for erecting an aluminum scaffolding？
How to build an aluminum scaffolding correctly？
What are the requirements and specifications for erecting an aluminum scaffolding？
The parts and tools required for erecting aluminum scaffolds generally include Adjustable spanner, hammer, scaffold spanner, level, folding measure, scaffold safety belt, helmet, gloves, rope, steel scissors, belt sling (sling), anti-fall device, professional tool bag, work boots (soft shoes), safety lighting, transport, pulley, skateboard rope, dust mask, special one-piece suit, earplug.
1. Assemble casters
The caster is the bottom part of the scaffold. The caster is connected with the adjustable foot and then connected with the frame.
2. Set up the frame
At least two people are required in the erection process. One person supports one side of the frame to prevent the frame from toppling. First, set up the cross bar, and pay attention to the horizontal state with the ground.
3. Set up a diagonal bar
Attention should be paid to the continuity in the erection of inclined rods. At the same time, the diagonal bar should be set on both sides of the frame, and the diagonal bar should be set on both sides of the frame in the opposite direction.
4. Erection of platform slab
When the platform plate is placed on the frame, attention should be paid to the connection between the platform plate and the frame in place, the four corners are in balanced contact and firmly connected with the frame.
5. Set up the second floor frame
When building the second floor frame, lift the second floor frame, align it vertically with the first floor frame, insert it, and then lock the safety button.
6. Erection of external support rod
When installing the external support rod, pay attention to a certain proportion between the scaffold body and the external support rod, and pay attention to the contact between the external support rod and the ground during the installation process.
7. Installation of a guardrail
The erection of guardrail is the last step in the installation of the scaffold, usually about 1 meter is erected or left as a guardrail.
1. The aluminum scaffolding erection personnel must be certified and have working experience.
2. Before setting up the operation, it is necessary to carefully check the safety belts, safety helmets, ladders, springboards, safety nets and other protective equipment of the operators, as well as the rotation and tools for aerial work.
3. For work places with insufficient natural light or for erection at night, adequate lighting equipment must be set up and safe voltage lighting should be used.
4. The aluminum scaffolding over 15m high or more complex scaffolds must be professionally designed before erection.
Golden Resource not only makes high-quality aluminum scaffolding, but also provides first-class service and consultation. You can consult us whether you have questions about the erection or demolition.
