According to the specific construction requirements, it can form single row and double row scaffolds, support frames, support columns, material lifting frames and other multi-functional construction equipment with a modulus of 0.6m and a variety of frame sizes and loads, and can make curve layout. The scaffold can be used with adjustable base jack, adjustable U jack, double adjustable early disassembly, cantilever beam, cantilever frame and other accessories, and can be used with all kinds of steel pipe scaffolds to realize all kinds of versatility. First, it can be erected on any uneven slope and stepped foundation; Second, it can support the stepped template and realize the early disassembly of the template; Third, it can realize the early removal of some support frames, set up access roads, cornices and flying wings; Fourth, it can cooperate with the erection of climbing frame, movable workbench and outer bent to realize the support function of various functions; Fifth, it can be used as a storage shelf for setting up various stages, advertising engineering supports, etc. The vertical pole has the function of arbitrarily lengthening according to the 600mm module, and also has the function of inverted butt joint, which provides convenient conditions for the use of special height and size. The wheel ringlock multifunctional steel pipe scaffold also provides technical support for the use of large standardized formwork and the hanging, installation and fixation of new formwork.
Safe And Reliable
Independent wedges are used to insert self-locking mechanism. Due to the interlocking and gravity, the ledger ends cannot come out even if the bolt is not knocked tightly. The plug-in has a self-locking function, which can be locked or removed by pressing the pin. In addition, the contact surface between the fastener and the pillar is large, so as to improve the bending strength of the steel pipe and ensure that the pillar will not skew when the two are combined. The vertical crossing accuracy of the axis line of the standard and the axis line of the ledger of the ringlock multifunctional steel scaffold is high and the stress property is reasonable. Therefore, it has large bearing capacity, strong stiffness and strong stability. Each standard is allowed to bear 3-4 tons. The number of diagonal brace is much less than that of traditional scaffolds.
Less Structure
Convenient construction and disassembly, basic structure and special parts, which can make the system suitable for various structural buildings; It is only composed of three types of components: standard, ledger and diagonal brace. The standard, ledger and diagonal brace are all made in the factory. First, it maximally prevents the easy loss and damage of traditional scaffold moving parts and components, and reduces the economic loss of the construction company; Second, there are no movable locking parts, which maximally prevents the unsafe hidden dangers caused by the movable locking parts of the traditional scaffold.
Large Bearing Capacity
The axial force transmission of the vertical pole makes the scaffold have high structural strength and good overall stability in three-dimensional space. The rosetter has reliable axial shear resistance, and the axes of various rods intersect at one point. The number of connecting ledgers is twice as many as that of the cuplock joint part, and the overall stability strength is increased by 20% compared with the cuplock scaffold.
With High Comprehensive Benefits
The component series is standardized, which is convenient for transportation and management. No scattered and easily lost components, low loss and less investment in the later stage.
The Product Has Economic Character
More convenient and faster to use,When use, you only need to insert the wedges at both ends of the ledgers into the corresponding conical holes on the standard and then knock it tightly. The speed of erection and disassembly and the quality of lapping can not be achieved by the traditional scaffold. Its erection and dismantling speed is 4-8 times that of fastener steel pipe scaffold and more than 2 times that of cuplock scaffold. Reduce labor time and labor remuneration, reduce freight and reduce comprehensive costs. The joint structure is reasonable, the operation is easy, light and simple. The weight of the standard is 6-9% less than that of the cuplock standard with the same length and specification.
Project Introduction
Quality Control
In order to meet the needs of the market, Ringlock Scaffolding suppliers are constantly developing and designing new products to meet the needs of construction with better products. At present, the ringlock scaffold is the most popular in the industry and It is developed by the introduction of advanced production technology from Europe.
The ringlock scaffolding uniformly refined by the suppliers have been treated with cold zinc. The hardness and strength are far better than other scaffolds.
In the process of safety and putting into use, the installation of ringlock can be started directly without any tools. Even a person who has not touched the ringlock scaffold can easily do the installation .
The ringlock scaffold produced by Laian Golden Resources has strong tightness and safety. The latch has automatic locking function.
You Can Use Our Contact Form To Send Us A Message.
The erection of the support rod-type cantilever scaffold needs to control the use load, and the erection must be firm. When erecting, the inner shelf should be erected first, so that the cross bar extends out of the wall, and then the diagonal bar is supported and the outgoing cross bar is firmly connected, and then the cantilevered part is erected, and the scaffolding board is laid. A safety net is set up below to ensure safety.
Setting Of Connecting Wall Parts
According to the axis size of the building, one is installed every 3 spans (6m) in the horizontal direction. In the vertical direction, one should be set every 3 to 4 meters, and each point should be staggered to form a plum-like arrangement. The method of erecting the wall parts is the same as that of the floor-standing scaffolding.
Vertical Control
When erecting, it is necessary to strictly control the verticality of the segmented scaffolding, and the allowable deviation of verticality.
Scaffolding
The bottom layer of the scaffolding board should be covered with thick wooden scaffolding boards, and the upper layers can be covered with perforated lightweight scaffolding boards punched from thin steel plates.
Safety Protection Facilities
Guardrails and toe guards should be set on each layer of the scaffolding. The outer and bottom surfaces of the scaffolding shall be closed with dense mesh safety nets, and the necessary passages shall be maintained between the scaffolding and the building. The connection of cantilever scaffolding poles and cantilever beams (or longitudinal beams). 150~200mm long steel pipes should be welded on the lifting beams (or longitudinal beams), the outer diameter of which is 1.0~1.5mm smaller than the inner diameter of the scaffolding poles, connected with fasteners, and 1~2 sweeping poles are set at the bottom of the poles. Make sure the shelf is stable.